AMINOL HYDROTRANS HT3 - SAE 30 TO 4 - 20L

AMINOL HYDROTRANS HT3 - SAE 30 TO 4 - 20L

AMINOL HYDROTRANS HT3 - SAE 30 TO 4 - 20L

0 reviews Write a review
  • 133.79 M (~ $78.70 )

Minimum quantity for order: 1000

Transmission-hydraulic fluid based on high-quality basic components for off-road, mining, construction and other equipment. Specially designed for high-loaded power transmissions, hydraulic systems and oil-immersed brakes in accordance with the requirements of Caterpillar, Komatsu. It is made on the basis of residual and distillate components, contains a multifunctional composition of additives improving friction, extreme pressure and anti-wear properties of the oil.


ADVANTAGES

  • Excellent anti-wear properties of oil, protection of electric drives and gears, reducing the cost of repairs.
  • Stable friction properties of the oil provide smooth operation of the clutch and brakes, reliable operation of the equipment.
  • High resistance to oxidation, minimizes the formation of acids causing corrosion, which extends the life of parts and assemblies.
  • High viscous stability of the oil keeps the oil carrying capacity throughout the replacement interval ensuring reliable lubrication of the units.
  • Compatible with seal materials, inertness to sealing materials helps minimize leakage and reduces lubricant costs.
  • Low propensity to foam provides reliable lubrication of all parts ensuring reliable operation of the equipment.
  • Universality, possibility of application in hydraulic systems, transmission units.

APPLICATION

  • For mining, construction and quarry equipment, including for Caterpillar, Komatsu
  • For off-road vehicles, where oils of the TO-4 class are required
  • In power gearboxes, hydraulic systems, wet brakes and clutch
  • On-board gearboxes, transfer boxes, power take-offs, differentials
  • Not suitable for operation where UTTO grade oil is required

PARAMETERS

VALUES

METHOD

1. Kinematic viscosity, mm2/s within 100 °С,

11,0-12,0

ASTM D 445 or GOST 33

2. Kinematic viscosity, mm2/s within 40 °С,

85,0-110,0

ASTM D 445 or GOST 33

3. Viscosity index, not less than

100

ASTM D 2270 or GOST 25371

4. Flash point by open cup tester, °С not lower than

215

ASTM D 92 or GOST 4333

5. Freezing point, ° С, not higher

-30

ASTM D 97 or GOST 20287

6. TBN, 1 mg KOH/g oil, not less than

7,6

ASTM D 2896 or GOST 30050

7. Sulfated ash content, % not more than

1,5

ASTM D 874 or GOST 12417

8. Density at 20°С, kg/m3, not more than

895

ASTM D 4052 or GOST 3900



Write a review

Note: HTML is not translated!
    Bad           Good