AMINOL INDUSTRIAL HYDRAULIC HLP 32 - 20L

AMINOL INDUSTRIAL HYDRAULIC HLP 32 - 20L

AMINOL INDUSTRIAL HYDRAULIC HLP 32 - 20L

0 reviews Write a review
  • 69.19 M (~ $40.70 )

Minimum quantity for order: 1000

Hydraulic oil is designed for use in hydraulic drives of stationary equipment where good anti-wear properties, excellent filterability, effective corrosion protection and good pumpability are required. It is made on the basis of distillate components, contains a multifunctional composition of additives improving frictional, anticorrosive and anti-wear properties of oil.

ADVANTAGES

  • Excellent anti-wear characteristics, minimizing wear on mating parts of hydraulic pumps, maintaining the service life of equipment.
  • High thermo-oxidative and thermal stability, reduction of formation of corrosion-active components and deposits during operation, ensuring reliable operation of precision pairs and valves.
  • Corrosion protection, corrosion inhibitors protect the surface of parts from the negative effects of acids and water.
  • High viscous stability of the oil keeps the oil carrying capacity throughout the replacement interval ensuring reliable lubrication of the units.
  • Compatible with seal materials, inertness to sealing materials helps minimize leakage and reduces lubricant costs.
  • Low propensity to foam provides reliable lubrication of all parts ensuring reliable operation of equipment.
  • High purity, which allows you to protect the precision drive pairs from wear.

APPLICATION

  • As a working fluid for various industrial hydraulic systems
  • Hydraulic systems of machine tools (presses, injection molding machines, heavy manipulators, machine tools, robots, molding machines for plastics, etc.)
  • In hydraulic pumps of different manufacturers
  • For piston, gear, axial-piston and vane pumps, in accordance with the requirements of manufacturers
  • In hydraulic systems of special road, agricultural and other equipment where a viscosity class of ISO 32 is required.

PARAMETERS

VALUES

METHOD

1. Kinematic viscosity, mm2/s, not less than 100 °С,

5,0

ASTM D 445 or GOST 33

2. Kinematic viscosity, mm2/s within 40 °С,

28,8-35,2

ASTM D 445 or GOST 33

3. Viscosity index, not less than

95

ASTM D 2270 or GOST 25371

4. Flash point by open cup tester, °С not lower than

185

ASTM D 92 or GOST 4333

5. Freezing point, ° С, not higher

-25

ASTM D 97 or GOST 20287

6. TBN, 1 mg KOH/g oil, not less than

1,0

ASTM D 2896 or GOST 30050

7. Mass fraction of ash, %, not more than

0,2

 ASTM D 482 or GOST 1461

8. Density at 20°С, kg/m3, not more than

890

ASTM D 4052 or GOST 3900



Write a review

Note: HTML is not translated!
    Bad           Good