SHPAK 200 FINISHED PLASTER BASED ON GYPSUM

SHPAK 200 FINISHED PLASTER BASED ON GYPSUM

SHPAK 200 FINISHED PLASTER BASED ON GYPSUM

0 reviews Write a review
  • Seller: MƏTANƏT-A ŞİRKƏTİ
  • Product Code : GİPS ƏSASLI ÜZLÜK ŞPATKLYOVKASI (alçı
  • Availability : In Stock
  • 4.45 M (~ $2.62 )

Minimum quantity for order: 100

Gypsum-based, enriched with mixtures expanding opportunities of the product application, high quality, white color, final layer finished plaster mixture with high adhesive ability.


The product conforms to the requirements of the AZS 046 (TS 370) standard.


 Fields of Application


·   can be used as the final layer of finished plaster for internal ceilings and walls of buildings;


·   can be used as fine plaster applied onto suspended gypsum ceilings, gypsum panels or surfaces treated with SHPAK 100, made of concrete, gas concrete, bricks, briquettes (coal, peat, ore pressed in the shape of bricks), construction stone, and other construction materials.


Application procedures


Preparation of the surface. Please pay attention to the treated surface: it should be healthy, dry, clean, and should have required dimensions; the surface should be totally free of fat and paraffin residues deteriorating adhesive force. Before application of the finished plaster the surface should be plastered with SHPAK 100 or the other similar products. Herewith the surface to be treated should first be dampened or primed with Binmader primer or the other similar products .


Preparation of the mixture. Pour 10 kg of SHPAK 200 to 6.5 - 7.0 liters of water, wait 3-4 minutes, then mix using a mixer or any suitable hand tool till the mixture is entirely homogeneous. After the finished plaster and water are completely mixed do not add any fresh powder or water to it.


Application. Using a trowel apply the prepared SHPAK 200 onto the wall or ceiling surface treated with SHPAK 100 or the other similar products. The prepared mixture should be applied within 130-150 minutes. The mixture should not be used after this period expired or crust formed.


 Recommendations. At the time of the finished plaster application the ambient and surface temperatures should be minimum +50C. If at the time of application the ambient temperature exceeds the limits of +50C - +300C range, then the required temperature level should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. The can and the equipment used for preparation of the mixture should always be clean. Dirty cans and tools decrease the useful life of the mixture and reduce its quality. It is recommended to clean all hand tools and devices with water immediately after use. When using a metal trowel pay special attention to avoid traces left on the surface.


 Technical specifications


Color

White

Operating temperature

+50 C - +300 C

Minimum thickness of the layer

1 mm

Useful life

130-150 minutes

Hardening period

300-320 minutes

Water /powder ratio in the mixture

6.5-7.0  liters of water / 10 kg gypsum

Period of drying

Approximately 2 days

Ultimate strength limits:

  • When bent
  • When compressed

 

2.4 MPa

4.7 MPa

·         Dry product pouring density

·         Ready for application product density

0.72 kg/liter

1.5 kg/liter

Surface strength

57 Shore D

Consumption

1 kq/m2

Shelf Life

6 months

Packing

30 kg laminated polypropylene sacks;

25 kg sacks made of 2- or 3-layer craft paper and 1 layer of polyethylene


 Warnings


·           pay special attention to the clean conditions of cans and water used for preparation;


·           do not add to the primer any substances other than water;


·           do not mix the product with PVA;


·        parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.


Warranty and technical support


With the exception of cases of works executed under the supervision of the company specialists, “Мatanat А company shall not be liable for any problems occurring due to improper use of the product by other persons.



Write a review

Note: HTML is not translated!
    Bad           Good