GIPER FINISHING PLASTER

GIPER FINISHING PLASTER

GIPER FINISHING PLASTER

0 reviews Write a review
  • By agreement (~ By agreement )

Minimum quantity for order: 1000

INTENDED USES: designed for  filling cracks and gaps between gypsum wall boards and preparation of high quality surfaces on plastered and primed internal walls, ceilings before application of paints and other decorative works.

SURFACE PREPARATION: The surface should be clean, and free from dust, dirt, loose particles and other foreign particles  that prevent the proper adhesion of the plaster. Apply the “Binder” produced by “Garant” LLC for better adhesion, where required.

PREPARATION OF THE MIXTURE: Pour 6-7 lt of water into a clean mixing vessel, add 10 kg of the finishing plaster mix slowly, wait for several minutes, and mix manually or using a proper mechanical mixer until a lump-free homogeneous mixture is achieved. Mix again after 5-6 minutes.

APPLICATION OF THE MIXTURE: The mixture is applied onto the surface and smoothed using a spatula. Polish with abrasive paper upon curing is complete.

Technical properties:

ColourWhite
Application temperature+5°C / +35 °C
Mixing ratio10 kg plaster/6-7 lt water
Application thickness1-5 mm
Pot life (minimum)60 min.
Cure time (minimum)2 days
Consumption for 5 mm thickness1-1.2 kg/m2
Compression strength2.5 N/mm2

Weight:

30 kg

Write a review

Note: HTML is not translated!
    Bad           Good